7 Mistakes to Avoid When Installing Commercial Doors for Businesses
Where would you be without the doors in your office? We’ll tell you where you’d be, you’d be outside your office staring at an inaccessible building!
But there’s so much more to installing commercial doors than just sticking a hole in the wall. Many people don’t consider the intricacies to door installation and end up with a building that simply isn’t up to par or doesn’t function properly at all.
Luckily, these mistakes are easy to identify and avoid. That’s why we’ve noted down these 7 key mistakes in commercial door installation.
Make a note of these, and commercial door installation will go considerably smoother.
1. Installing Commercial Doors: Consider Regulations
One very important aspect to do when you’re starting out in commercial door installation is to consider regulatory requirements.
This is most important when factoring in disability and wheelchair access. With commercial property, it has to be accessible for every person. This means you also need to consider other aspects like wheelchair ramps.
But when it comes to doors themselves, you must follow strict ADA regulations.
The ADA notes how wide a door needs to be so that wheelchair users can fit through them, as well as other measurements to take into account. If you don’t follow these regulations, you’re already making a big mistake in your commercial door installation.
2. Consider the Swing
With almost all door designs, there’s a swinging component. It needs to be opened and closed to allow for entry.
Where many door installers mess up is in forgetting to account for the arc of a door in the building design. If your property is particularly cramped, you may not have considered how far the door arcs out when opening.
This could make a particularly small corridor inaccessible due to two clashing door swings.
You should factor the swing of a door into early measurements, to ensure that a door can be opened and closed within the space.
3. Measure and Measure Again!
Another thing to note is in response to these measurements; always double-check them!
You can’t simply measure a space once and then assume you’ve done it right the first time. You have to double-check every single measurement you take before you build.
Otherwise, if it is wrong you’re going to be spending a whole lot more time and money fixing the problem. Double-checking measurements is about recognizing potential problems early, to prevent harder work down the road.
It might seem like a waste of time at the time, but it’s nothing compared to the waste of time you could face if a measurement is incorrect.
4. Think About the Trimmings
Who doesn’t love the trimmings with their roasted turkey!? Well, commercial doors love their trimmings to be considered too.
Everyone thinks about the actual door itself (just like the cooking of a turkey) but the trimmings of a door are just as important. If you make a trimming too wide, it can impact the strength of a door and lead to it breaking down far sooner than anticipated.
But if trimming is too thin there might be large gaps beneath a door that look unsightly and make your office space seem unprofessionally built. Neither of these is an ideal conclusion.
Always make your trimmings fit your door, and you’ll be feasting on a well-installed commercial door the same way you feast on that turkey!
5. Think About the Hardware
A door is never just a door. If it was, it’d be a block that looks like an extra part of the wall.
No, a door includes other hardware like door handles, industrial doorknobs, and locks that are an integral part of the installation process. You should always make sure you pick the right hardware for the door you are installing.
This is more important when it comes to locks on your doors. One very important thing to remember, and you’d be surprised how many people don’t, is installing the lock on the right side of the door!
These are simple mistakes that can cause a plethora of problems down the line. Consider them on installation to prevent these later on.
6. A Photo-Worthy Finish
With a door on a commercial property, it needs to look great as well as function seamlessly. If you’re bringing potential customers into your office, they want to be impressed by it.
These are subliminal opinions, and an opinion on your front door may not seem like a big deal at first, but we promise you it is! Think about the paint on a finished door, or what kind of oil or wax you’re using.
It’s no good going into all the effort of installing a door perfectly to ruin it at the final hurdle. Plan the finish well in advance so you know it’ll fit the entire office design of your commercial property.
7. Don’t Assume That It’s Easy
With installing commercial doors, don’t assume it’s an easy part of the process that you can do yourself. We promise you, door installation is a complex part of a build process.
Mistakes can be made when people assume they are capable of installing doors themselves and don’t call a professional. Then, they end up wasting more time and more money as a result.
With commercial door installation, it pays to work with the pros for the best result.
Where Could I Get Help With Commercial Doors?
Those are the 7 major points of consideration when it comes to installing commercial doors. But we know you may have more questions.
That’s where we come in. Here at Accurate Hardware Store, we provide the finest quality doors and hardware for commercial builds.
Not only that, but all of our products are available for a 24-48 hour delivery or an immediate pick-up for those who just can’t wait to get started on their commercial door installation.
If you have more questions about installation or commercial doors, make sure you contact us directly.